Overview
Tikkurila Vinyl Matt is a full matt water-based high-performance emulsion paint, providing an excellent finish for interior walls. Formulated to be scrub resistant, this vinyl matt is easy to apply and leaves a cleanable and wipable long-lasting finish making it perfect for walls and ceilings in living rooms, bedrooms and children's room. Delivering excellent coverage, it also levels off to hide surface imperfections.
- Full Matt finish
- Extreme durability
- Ultra Low VOC
- Works on multiple surfaces including concrete, plaster and brick
- Tintable in 20 000 colours
- Unpainted surfaces: Remove loose, flaking paint or lacquer with a scraper and sand the whole surface. Repair any cracks or holes with appropriate filler. Remove sanding dust before starting painting. It is recommended to prime the surface with a suitable primer like .
- Previously painted surfaces: Wash surfaces with detergent. Remove loose, flaking paint or lacquer with a scraper and sand the whole surface. Repair any cracks or holes with appropriate filler. Remove sanding dust before starting painting. If necessary prime the surface with a suitable primer like .
- Stir thoroughly before use to ensure the paint is completely mixed.
- Before application, thin if necessary, up to 5% with water, in sufficient amount of paint from one production batch to avoid possible colour difference.
- Apply 1 or 2 coats of Vinyl Matt by brush, roller or sprayer.
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Tikkurila tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order. Note: Depending on the amount of colourant required to mix your chosen colour, there may be up to a 10% variant on the advertised paint volume.Area | Interior |
Recommended Use | Walls and ceilings in living rooms, bedrooms and children’s rooms, as well as other similar dry spaces. Suitable for the interior painting of concrete, plaster, brick, filler-treated and common building board surfaces on walls in living quarters. |
Base | Water-Based |
Coverage | Up to 10m² per litre |
Drying Time | Touch dry: 30 Minutes |
Re-Coat Time | 3 Hours |
Recommended Coats | 1-2 Coats |
Application Method | Brush, Roller or Sprayer |
VOC Levels | Ultra Low |
Clean Up | Remove as much paint as possible from the equipment before cleaning with water |
Preparation
Ensure the surface is clean, dry and free from dirt and grease.
Application
Always test a small area of the surface to be painted to ensure you are happy with the finished results
Always follow manufacturer's instructions found on the tin
Aftercare & Storage
Store the paint in dry conditions and protect from extremes of temperature
After use firmly secure the lid.
Tinted products should be used during the same painting season.